Installation guide

Install the AP300

To complete AP300 installation, you need the items listed below.

Additional Equipment

A power source is needed to power the AP300. Available options are:

z External ACC-AP300-PWR power supply

z 802.3af compliant PoE device

z Pre-standard 802.3at compliant PoE device

AP150, AP200, and AP300 work with all switches that support standard 802.3af.

Install the AP300

Select a Location

All AP300 interconnected equipment must be contained within the same building, including the inter-

connected equipment's associated LAN connection. In addition, the AP300 should be mounted in a loca-

tion that meets the following conditions:

Installation Type Consumable Items Required

Horizontal mounting None

Vertical mounting over a wall

stud

z Two #6 x 2" wood screws for a wood stud; or

z Two #6 x 1½" metal screws for a metal stud

z Mounting bracket

Vertical mounting on sheetrock

z Two #6 x 1" screws

z Two #4-6 x 7/8" ribbed plastic wall anchors

z Mounting bracket

Horizontal mounting below a

hanging ceiling

z Two caddy fasteners

z Two plastic spacers

z Two keps nuts (with attached lock washer)

z Mounting bracket

Using existing third party

brackets

z Use included shoulder screws