Installation guide

Installation Requirements

An array of holes on the mounting bracket allows the AP300 to be mounted on the wall and over junc-

tion boxes or molly bolts. There are holes for passing the PoE Ethernet or external power supply cable

through the bracket if the bracket is mounted on a junction box. A template of this bracket is included

in Appendix E of this guide.

The AP300 has a security cable slot so you can lock the AP300 with a standard security cable, such as

those used to secure laptop computers.

These optional mounting kits can be purchased to mount the AP300 either from the ceiling or inside an

enclosure:

z Suspended Ceiling Rail Mounting Kit: ACC-MNT-SCRMKIT

z Above Suspended Ceiling Mounting Kit (T-Bar Hanger): ACC-MNT-ASCMKIT

z Inside a Hoffman Enclosure using Hoffman compatible mounting bracket: ACC-AP300-BHE

(enclosure not provided)

AP300 Configuration Power Options

1 radio – a/b/g mode External power supply or PoE 802.3af

1 radio – n-mode External power supply or PoE 802.3af

2 radios – 1 a/b/g mode, 1 n mode

For 2x2 MIMO mode, use either a power supply or or a

802.3af compliant PoE.

For 3x3 MIMO mode, use either a power supply or a pre-

standard 802.3at compliant PoE.

2 radios – both n mode

For 2x2 MIMO mode, use either a power supply or or a

802.3af compliant PoE.

For 3x3 MIMO mode, use either a power supply or a pre-

standard 802.3at compliant PoE.

2 radios – both a/b/g mode External power supply or PoE 802.3af