Installation guide

Unpack the AP300

The AP300 series has five models as shown below. Depending on which model you are installing, you

will have either six or three antennas. The drawings in this chapter show six antennas.

Confirm that the AP300 shipping package contains these items:

z AP300 with attached mounting bracket

z Six (AP320, AP311, AP302) or three (AP310, AP301) antennas

Determine Power Requirements

Your power requirements will vary, depending on which AP300 radios are deployed and what mode is

used. See below. AP300 works with all switches that support standard 802.3af and pre standard

802.3at.

Model Radio 1 (Ant4, Ant5, Ant6) Radio 2 (Ant1, Ant2, Ant3)

AP320

a/b/g/n with 3 dual band omni-

directional antennas

a/b/g/n with 3 dual band omni-

directional antennas

AP311

a/b/g/n with 3 dual band omni-

directional antennas

a/b/g with 3 dual band omni-directional

antennas

AP310

a/b/g/n with 3 dual band omni-

directional antennas

AP302

a/b/g with 3 dual band omni-directional

antennas

a/b/g with 3 dual band omni-directional

antennas

AP301

a/b/g with 3 dual band omni-directional

antenna