User's Manual

9 / 84
© 2014 Mertik Maxitrol GmbH & Co. KG, All Rights Reserved.
ENGLISH
12
12 12
12
12 12
12 12
12
12 12
12
12 1
2
12
12
12
12
Figure 11
ADDITIONAL FUNCTION RF: FAN – LIGHT/DIMMER – LATCHING SOLENOID
INSTALLATION INSTRUCTIONS FOR OEM USE ONLY
Receiver G6R-R3(4)AU...
G6R-BU(E)AV2 G6R-BU(E)SV2 G6R-BU(E)MV2
NOTICE
Hand tighten M4 screws (not provided) to secure the module via the two pre-drilled screw holes. Use only M4 screws to secure the module.
Max. AWG 12/2.5 mm
2
GV60 Valve
ELECTRIC SHOCK HAZARD 
injury, or loss of life.
-
tions. Service and installation must be performed by a trained, experienced service technician.
NOT use the module if you suspect it may be damaged.
4 levels from 60 % to 100 % 14 to 100 Watt The appliance manufacturer must test levels with fan. Levels may vary with fan characteristics.
 20 % to 100 % 14 to 100 Watt Not for LED and not for energy saving lamp.
Latching Solenoid Valve Latching solenoid as shown shuts off burner 2, leaving burner 1 on. For other options con- sult Mertik Maxitrol.
Cable V Module-Receiver
Molex 39-01-4031
Molex 39-01-4041
Screw holes for use with M4 screws (not provided)