User's Manual

18 / 84
© 2014 Mertik Maxitrol GmbH & Co. KG, All Rights Reserved.
ENGLISH
OPERATING INSTRUCTIONS FOR OEM USE ONLY
 Circulating Fan Setting Mode
Turns circulating fan ON and OFF and ad-
justs fan speed.

TEMP
Nighttime Setback Temperature
Mode
(Appliance must be in standby mode; pilot
ignited)
The room temperature is measured and
compared to the Nighttime Setback Tem-
      -
matically adjusted to achieve the Nighttime
Setback Temperature.

TIMER
Timer Mode
(Appliance must be in standby mode; pilot
ignited)
The Timers P1 and P2 (Program 1, Pro-
gram 2) each can be programmed to go ON

see Timer Programming Mode.
NOTE: The display shows the set tempera-
ture every 30 seconds.
SETTING °C/24 HOUR OR °F/12 HOUR CLOCK
OFF and 
display changes from Fahrenheit/12 hour
clock to Celsius/24 hour clock and vice ver-
sa.
SETTING THE TIME

a) Installing the battery or
b) Simultaneously pressing the
(large





-
ute.
-
ual mode.
SETTING THE ON/OFF TEMPERATURES
Setting the “DAYTIME” Temperature
DEFAULT SETTINGS:
TEMP
(sun), 23 °C/74 °F
SET button to scroll to TEMP
TEMP
(sun) mode. Hold the SET button
until the TEMP
 
Daytime Set Temperature.
      
Daytime Set Temperature.
OFF or simply wait to complete pro-
gramming.
Setting the “NIGHTTIME SETBACK” Temperature
DEFAULT SETTINGS:
TEMP
(moon), “ ” (OFF)
SET button to scroll to TEMP
TEMP
(moon) mode. Hold the SET button

 
Nighttime Setback Temperature.