Users Manual Part 2

30 / 30
INSTALLATION AND OPERATING INSTRUCTIONS DRAFT FOR OEM USE ONLY
© 2019 Mertik Maxitrol GmbH & Co. KG, All Rights Reserved.
MYFIRE APP SETUP
Figure 32
ON-OFF
UP
DOWN
2nd Burner
Feature
-11
º
C
OR
For Relay with Cable strain reliefs required, min. 30 N. (to be mounted by installer)
Relay with Cable (volt-free contact) G6R-CL40 (50 V / 0.6 A)
G6R-CLB40 (240 V / 5 A)
The Puck – Handset (optional)
B6R-H8(9)SP...
Symax Handset (optional)
B6R-H8(A)...P...D...
RGB 1 Phoenix, MC 1.5/3-ST-3.5
RGB 2 Phoenix, MC 1.5/3-ST-3.5
RGB Power Input
LED Driver / Transformer
5 V - 24 V DC / 5 A
WS2811 / 12 Standard
Provided by OEM.
REQUIRED HANDSET
Mobile Device with myre App (android iOS)
V Module (optional) G6R-BEAV3... G6R-BUMV3...
Cable G6R-CBV...
Pilot Burner G30-ZP2M
Main Burner
Gas Combination Control GV60...
Interrupter Block G60-ZUSV...
Home Network
Thermocurrent Cable SW with ON/OFF Switch G60-ZSKS(L)S... Thermocurrent Cable TC G60-ZKIRS... 8 Wire Cable G6R-C...
Wall Switch (optional) G6R-ZWSE(N)...
Mains Adapter (optional) G60-ZMA3
Cable G60-ZCSW2... myre Wi-Fi Box B6R-W2(XX)-(2)-(T)
Ignition Cable G60-ZKIS...
Receiver B6R-R8P(T)(T2), B6R-RAP, B6R-RAPT, B6R-RAPT2
Temperature Sensor (optional) G60-ZCT...
Light
Innitely vari-
able
20 % to 100 %
0 to 100 Watt
NOTE: To
connect LED
lights or 12 V
lamps a driver/
transformer is
needed.
Fan
4 levels
from 60%
to 100%
14 to 100
Watt
Mains
Power
115/230 V;
AC