Users Manual Part 2

21 / 29

ENGLISH

INSTALLATION AND OPERATING INSTRUCTIONS FOR OEM USE ONLY

DRAFT 21/11/2018

ON:

Press

button ( displayed). Light is

on at preset level.

OFF:

Press

button ( disappears).

SETTING:

1. Press

button and hold until ash-

es.

2. To adjust light between 20…100 %

press

or button.

3. To conrm setting either press

but-

ton or wait (

displayed).

NOTE: The Light works independently of the pilot ame. If you

want the light on but no ame, press

button.

MYFIRE APP

NOTICE

Before the app can be used, the myre Wi-Fi Box must be wired

and plugged into mains power according to myre app setup

diagram (see gure 30, page 29), and the app setup must be

completed (see myre app setup, page 24).

1 2

OFF

If Thermostatic, Program or Eco Mode

is activated, the corresponding icon and

“

” is displayed on the handset.

The modes can be operated according

to the descriptions on previous pages.

NOTE: In Manual Mode “

” is NOT

displayed on the handset.

LIGHT / DIMMER OPERATION