User Instructions Part 1

OPERATING INSTRUCTIONS FOR OEM USE ONLY
© 2013 Mertik Maxitrol GmbH & Co. KG, All Rights Reserved.
14 / 28
SETTING CELSIUS OR FAHRENHEIT
1 2
ON
AM
PM
OFF
To change between °C and °F, press
and
buttons simultaneously.
NOTE: Choosing °F results in a 12 hour
clock. Choosing °C results in a
24 hour clock.
SETTING THE TIME
1 2
ON
AM
PM
OFF
1. Press and buttons simultane-
ously. Hour fl ashes.
2. To select hour press
or button.
3. Press
and buttons simultane-
ously. Minutes fl ash.
4. To select minutes press
or but-
ton.
5. To confi rm press
and buttons
simultaneously or wait.
MANUAL MODE (HANDSET)
NOTICE
BEFORE OPERATING
1. Make sure MANUAL knob on the GV60 Valve is in the ON,
full counterclockwise
position.
2. Place the ON/OFF switch (if equipped) in the “I” (ON position).
TO TURN ON FIRE
When pilot ignition is confi rmed, motor turns automatically to
maximum fl ame height.
1 2
ON
AM
PM
OFF
Handset
▪ Press
button until a short beep con-
fi rms the start sequence has begun;
release button.
▪ Beeps continue while ignition is in pro-
cess.
▪ Rotating circle is shown on display un-
til ignition sequence is complete.
▪ Main gas fl ows once pilot ignition is
confi rmed.
▪ Handset automatically goes into Man-
ual mode after main burner ignition.
If the pilot does not stay lit after several tries, turn the main valve
knob to OFF and follow the instructions “TURN OFF GAS TO
APPLIANCE” (page 28).
Standby Mode (Pilot Flame)
Handset
▪
Press and hold button to set appliance to pilot fl ame.
4-SYMBOL
Figure 20: 4-symbol Display
Temperature
Countdown Timer
Battery Status
Signal Indicator Child Proof
AM
PM
Time
°F or °C