User Manual
Table Of Contents
BROWAN COMMUNICATIONS All rights reserved 15
12.2 For Sensor Settings
12.2.1 Payload
Port
204
Bytes
0
1~4
Field
Cmd
Config
Cmd
Command
1 byte
Bit [7:0]
0x00 – Set keepalive interval in sec.
default value : 3600 sec
value range: 15~65535
0x02 – Set occupied interval in sec.
default value : 600 sec
value range: 0~65535
0x03 – Set free detection time in min.
default value: 5 min
value range: 0~255
0x04 - Set trigger count in the occupied status.
default value : 0
value range: 0~65535
0x05 - Set PIR parameters.
default value: please see 12.1
0x06 – Set tamper detection on/off
default: enable