Operating instructions

10
DISPLAY PANEL
Shows the principal functions of the oven.
Whencooking,thetimeremainingcountsdown.
Alsodisplayserrormessagesandoventemperature.
Whenstoringandrecallingaprogramthedisplay
indicatestheprogramnumberanddetails.
FUNCTION PADS
The function pads select options shown in the DISPLAY
PANEL.
CONTROL PANEL
FUNCTION PADS
DISPLAY PANEL
MenuKeY
SOCKET
CANCEL PADCOOL DOWN
PAD
FUNCTION PADS
MenuKey 2
TheMenuKeySystemautomaticallychangesallthe
cookingprogramswithanelectronickeyandallows
programnamestobeidentied
COOL DOWN PAD
Puts the oven into Cool Down Mode, see Cleaning 2
page 20.
CANCEL PAD
Cancelsalltimedcookingcycles,pre-programmed
operationsandstopsthemicrowaveenergy.Itdoesnot
altertheoventemperature.Iftheovenishot,foodwill
continuetocookandshouldberemovedfromtheoven
immediately.Thispadwillalsocancelanyincorrect
operations.Itwillnoteraseprograms.
FUNCTION PADS
DisplayPanelErrormessages
Message
Condition
Possible cause
ERROR MAGNETRON 1
ERROR MAGNETRON 2
Magnetron 1 has overheated
Magnetron 2 has overheated
ERROR MAGNETRON 1 & 2
Magnetron 1 and 2 have
overheated
CAVITY SENSOR ERROR
Cavitytemperatureexceeds
morethan50°Cabove
PREHEATtemperature
setting during cook cycle
BlockedAirlter(s)
Oven located near hot air sources
Ovenbeingusedempty
Call Service Engineer
Indicatescombustion(re)inovencavity