User Manual

PROGRAMMING MODES
1. PRESS and HOLD the PROG button for
3 seconds. Controller will display:
MAIN MENU
EDIT MENU ITEM
2. PRESS the PROG button 1X. Controller
will display “SELECT PRODUCT

"
3. SELECT the desired menu item button
with a number on the controller.
4. Controller will display the menu item.
5. PRESS the PROG button 10X until
“UPPER HEATER XXX%” appears in the
display.
6. ENTER the desired Upper Heater Duty
Cycle Power with the corresponding
numbered buttons.
Button 2 - Increases Upper Heater Duty
Cycle by increments of 5%.
Button 8 - Decreases Upper Heater Duty
Cycle by increments of 5%.
7. Controller will display " UPPER HEATER
XXX% "
8. PRESS the START/STOP button to exit
the programming mode and return to the
menu item previously selected.
1. PRESS and HOLD the PROG button for
3 seconds. Controller will display:
MAIN MENU
EDIT MENU ITEM
2. PRESS the PROG button 1X. Controller
will display “SELECT PRODUCT

"
3. SELECT the desired menu item button
with a number on the controller.
4. Controller will display the menu item.
5. PRESS the PROG button 11X until
“LOWER HEATER XXX%” appears in
the display.
6. ENTER the desired Lower Heater Duty
Cycle Power with the corresponding
numbered buttons.
Button 2 - Increases Lower Heater Duty
Cycle by increments of 5%.
Button 8 - Decreases Lower Heater Duty
Cycle by increments of 5%.
7. Controller will display " LOWER HEATER
XXX% "
8. PRESS the START/STOP button to exit
the programming mode and return to the
menu item previously selected.
16
To Change the Upper Heater Duty Cycle
The Upper Duty Cycle is the percentage of time that
the upper heating elements are on during the Cook
Time.
For more information see page xx.
The Lower Duty Cycle is the percentage of time that
the lower heating elements are on during the Cook
Time.
For more information see page xx.
To Change the Lower Heater Duty Cycle