User Manual

1. PRESS and HOLD the PROG button for
3 seconds. Controller will display:
MAIN MENU
EDIT MENU ITEM
2. PRESS the PROG button 1X. Controller
will display “.SELECT PRODUCT

"
3. SELECT the desired menu item button
with a number on the controller.
4. Controller will display the menu item.
5. PRESS the PROG button 3X until
“COOK TIME XX:XX” appears in the
display.
6. ENTER the desired cook time with the
corresponding numbered buttons.
Ex. Entering 4 minutes for menu item
that is set for 3:45 will follow like:
Enter 0-4-0-0 for 4 Minutes
7. Controller will display " Remove Time
XX:XX "
8. PRESS the START/STOP button to exit
the programming mode and return to the
menu item previously selected.
1. PRESS and HOLD the PROG button for
3 seconds. Controller will display:
MAIN MENU
EDIT MENU ITEM
2. PRESS the PROG button 1X. Controller
will display “.SELECT PRODUCT

"
3. SELECT the desired menu item button
with a number on the controller.
4. Controller will display the menu item.
5. PRESS the PROG button 2X until
“COOK TEMP XXXF” appears in the
display.
6. ENTER the desired cook temperature
with the corresponding numbered
buttons.
Ex. Entering 345º F for menu item that
is set for 400º F will follow like:
Enter 3-4-5 for 345 degrees
7. Controller will display " REMOVE TIME
XXX ".
8. PRESS the START/STOP button to exit
the programming mode and return to the
menu item previously selected.
13
TO ENTER THE PROGRAMMING MODE, THE UNIT MUST BE IN THE “OFF” OR “IDLE” MODE.
All Timers programmed in the MenuFlex are
timers programmed in “MM-SS” format:
MM-SS
Minutes Seconds
To Change the Cook Temperature
To Change the Remove Time
PROGRAMMING MODES