User Manual

Upon power up of the Garland Menu-Flex
oven controller will display “OFF”, and will be
in the “OFF” mode.
You may start a cook cycle as long as the
display doesn’t flash “TOO COOL” or “TOO
HOT”. - Load product and PRESS START /
STOP BUTTON.
10
There are various options in the “OFF” mode.
1. Pressing the TEMP button – Checks the
actual temperature of the oven.
2. Pressing and Holding the PROG button
for 3 seconds – Enters the program mode.
3. Pressing any numbered button – Selects
a menu item.
The IDLE mode is when the oven is up to set
temperature and stabilized within +/- 20
Degrees Fahrenheit of the selected menu
items set point.
20 Degrees Above Set Temperature -
“TOO HOT”
20 Degrees Below Set Temperature -
“TOO COOL”
The controller will alternately display one of
the above Messages and the selected menu
item if the temperature sensed is +/- 20
Degrees Fahrenheit of the selected menu
items set point.
If ANY of the above-mentioned “TOO HOT”
or “TOO COOL” scenarios exist, initiating a
cook cycle will be PROHIBITED until proper
operating temperature is reached.
You may check the actual oven temperature
by pressing the TEMP button.
You may also check the actual oven
temperature and the set point for a specific
menu item by pressing the number of that
menu item and pressing TEMP within 3
seconds.
The controller will return to its previous menu
setting after 3 seconds.
When the operator presses the
START/STOP button to initiate a cook cycle,
the START/STOP LED turns on and the first
line of the display will show that menu item
that is being cooked. The second line will
show the time remaining in the cook cycle.
Ex:
Upon completion of the cook cycle, the
display will show “REMOVE” in the second
line of the display window, and an audible
alarm will sound.
Ex:
BISCIUTS
REMAINING 01:30
BISCIUTS
REMOVE
The audible alarm can be programmed in the
controller for either “MANUAL” or “AUTO”.
•
Under the MANUAL mode, the audible
alarm will sound at the end of the cook
cycle, and will continue to sound until the
operator presses the START/STOP
button.
•
Under the AUTO mode, the audible alarm
will sound at the end of the cook cycle,
and sound for ONLY 5 seconds.
Audible Alarm
Cook Mode
Starting a cook cycle
Checking Temperatures
IDLE Mode
“OFF” Mode
Power Up
NORMAL OPERATION