User's Manual

PROGRAMMING MODES
1. PRESS and HOLD the PROG button for
3 seconds. Controller will display:
MAIN MENU
EDIT MENU ITEM
2. PRESS the PROG button 1X. Controller
will display “SELECT PRODUCT

"
3. SELECT the desired menu item button
with a number on the controller.
4. Controller will display the menu item.
5. PRESS the PROG button 8X until
“STAGED HEAT (YES/NO)” appears in
the display.
6. To select the desired STAGED HEAT
status, PRESS BUTTON 2 to scroll
between YES or NO.
7. Controller will display " STAGED HEAT
(YES / NO) "
8. PRESS the START/STOP button to exit
the programming mode and return to the
menu item previously selected.
1. PRESS and HOLD the PROG button for
3 seconds. Controller will display:
MAIN MENU
EDIT MENU ITEM
2. PRESS the PROG button 1X. Controller
will display “SELECT PRODUCT

"
3. SELECT the desired menu item button
with a number on the controller.
4. Controller will display the menu item.
5. PRESS the PROG button 9X until “FAN
CYCLE (YES/NO)” appears in the
display.
6. To select the desired FAN CYCLE
status, PRESS BUTTON 2 to scroll
between YES or NO.
7. Controller will display " FAN CYCLE
(YES / NO) "
8. PRESS the START/STOP button to exit
the programming mode and return to the
menu item previously selected.
17
The Staged Heat Function is the Degree Hysteresis in
which the heating elements will cycle.
For more information see page xx.
The Fan Cycle Status is the status in which the
Convection Fan will operate in conjuction with the
Heating Elements.
For more information see page xx.
To Change the FAN CYCLE Status
To Change the STAGED HEAT Status