User's Manual

PROGRAMMING MODES
1. PRESS and HOLD the PROG button for
3 seconds. Controller will display:
MAIN MENU
EDIT MENU ITEM
2. PRESS the PROG button 1X. Controller
will display “SELECT PRODUCT

"
3. SELECT the desired menu item button
with a number on the controller.
4. Controller will display the menu item.
5. PRESS the PROG button 6X until
“MICRO TIME XX:XX” appears in the
display.
6. ENTER the desired Microwave Time with
the corresponding numbered buttons.
Ex. Entering 4:00 for menu item that is
set for 3:45 will follow like:
Enter 0-4-0-0 for 4 Minutes
7. Controller will display " MICRO TIME XX:
XX ".
8. PRESS the START/STOP button to exit
the programming mode and return to the
menu item previously selected.
1. PRESS and HOLD the PROG button for
3 seconds. Controller will display:
MAIN MENU
EDIT MENU ITEM
2. PRESS the PROG button 1X. Controller
will display “.SELECT PRODUCT

"
3. SELECT the desired menu item button
with a number on the controller.
4. Controller will display the menu item.
5. PRESS the PROG button 7X until “SOAK
TIME XX:XX” appears in the display.
6. ENTER the desired Soak Time with the
corresponding numbered buttons.
Ex. Entering 4 Minutes for menu item
that is set for 3:35 will follow like:
Enter 0-4-0-0 for 4 Minutes
7. Controller will display " SOAK TIME XX:
XX ".
8. PRESS the START/STOP button to exit
the programming mode and return to the
menu item previously selected.
15
The Microwave Cook Time is the Time DURING THE
COOK TIME that the Microwave power is ON.
For more information see page xx.
The Soak Time is the time the microwaves, and con-
vection heat can penetrate the product inside the oven.
For more information see page xx.
IMPORTANT NOTE: All Timers programmed
in the MenuFlex are timers programmed in
“MM-SS” format:
MM-SS
Minutes Seconds
IMPORTANT NOTE: All Timers programmed
in the MenuFlex are timers programmed in
“MM-SS” format:
MM-SS
Minutes Seconds
To Change the Soak Time
To Change the Microwave Cook Time