User's Manual

PROGRAMMING MODES
1. PRESS and HOLD the PROG button for
3 seconds. Controller will display:
MAIN MENU
EDIT MENU ITEM
2. PRESS the PROG button 1X. Controller
will display “.SELECT PRODUCT

"
3. SELECT the desired menu item button
with a number on the controller.
4. Controller will display the menu item.
5. PRESS the PROG button 4X until
“MICRO DELAY XX: XX” appears in the
display.
6. ENTER the desired Microwave Delay
time with the corresponding numbered
buttons.
7. Ex. Entering 4 minutes for menu item
that is set for 3:45 will follow like:
Enter 0-4-0-0 for 4 Minutes
8. Controller will display " MICRO DELAY
XX: XX "
9. PRESS the START/STOP button to exit
the programming mode and return to the
menu item previously selected.
1. PRESS and HOLD the PROG button for
3 seconds. Controller will display:
MAIN MENU
EDIT MENU ITEM
2. PRESS the PROG button 1X. Controller
will display “.SELECT PRODUCT

"
3. SELECT the desired menu item button
with a number on the controller.
4. Controller will display the menu item.
5. PRESS the PROG button 5X until
“MICRO PWR XXX%” appears in the
display.
6. ENTER the desired Microwave Power
with the corresponding numbered
buttons.
Button 2 - Increases Microwave Power in
increments of 5%.
Button 8 - Decreases Microwave Power in
increments of 5%.
7. Controller will display " MICRO POWER
XX% "
8. PRESS the START/STOP button to exit
the programming mode and return to the
menu item previously selected.
To Change the Microwave Delay Time
To Change the Microwave Power
14
The Microwave Delay Time is the time in which during
the cook cycle, the controller will be delayed before the
Microwave Time starts.
For more information see page xx.
The Microwave Power is the percentage of power that
the magnetron puts out during the Microwave Time.
For more information see page xx.
IMPORTANT NOTE: All Timers programmed
in the MenuFlex are timers programmed in
“MM-SS” format:
MM-SS
Minutes Seconds