Service manual

Page 5 400 Series Ovens 32Z3769 Issue 1
Positioning the Oven
In order to maintain adequate ventilation for air intake and exhaust, and to allow access for
cleaning the air filters, you must allow a minimum of 50mm(2 inches) clearance at the sides
and rear of the oven, and at least 150mm above.
Air intake temperature should not exceed 35°C (95°F).
Excessive temperature will lead to reduced operating duty cycle or premature ageing of
internal components.
NEVER Install an oven above fryers, grills, griddles or any other major heat source.
NEVER Stack machines on top of each other - always use a double stand.
ALWAYS Place containers in the cavity carefully - impact damage may chip the
vitreous enamel coating.
Installation instructions