User's Manual

12
PAUSE FACILITY
A cooking cycle may be interrupted by opening the door.
This facility is useful when stirring, repositioning or if temperature readings are required during a
heating cycle
On opening the door the timer will be held at this point and the light on the relevant power pad
(microwave or convection) will flash to indicate an interrupted cycle.
TO CONTINUE
To continue the cycle close the door, an audible warning sounds as a reminder to press any
POWER PAD to restart the timer.
To continue a Program cycle press START
AUDIBLE WARNING
At the end of every timed cycle an audible warning will sound.
The audible warning stops when the door is opened.
On closing the door after interrupting the cycle the audible
warning sounds as a reminder to start the timer (see PAUSE)
The audible warning can be stopped by touching the cancel pad but it is
important to remember that food in the oven will continue to brown until
removed.
Hints and Tips for improved operation
Care should be taken when defrosting in a hot oven.
For best results, defrost first thing in the morning when the oven is still cold.
Combination and convection only cooking may be carried out on a rising temperature but
extra attention must be given to timings.
Convection only cooking can be carried out without setting a time.
Microwave heating may be introduced part-way through a manually set convection only
cycle.
However, we strongly recommend that only the most experienced microwave operator
uses this facility as the microwave energy will then be on a time set for convection
cooking.
Cooking may be interrupted by opening the door. Close the door and touch the start button
to continue.