Service manual

Page 42
6. Push fit the new fuses Pt. No. 30Z1177 into the fuse holders.
7. Fit new label Pt. No. 31Z2092 over the existing label leaving the F5 and F1 still showing (C)
8. Power up the oven and check machine functions correctly.
(Care should be taken when powering up ovens with covers removed).
If fuse still blows, check microswitch setup is correct and replace if necessary.
9. Turn off the power and isolate the oven from the mains power supply.
10. Replace covers.
20A FUSE
FLM SERIES
MERRYCHEF PART
No. 30Z1177
C
APPENDIX 7: Fuse change (FLM20) 2