Service manual

Page 36
Step 9 Fit new wave trap Pt. No. 40C1201 to cavity. See figures 1(a) & 1(b)
(Making sure it is centred in the hole)
Ensure wave trap is fitted correctly and not caught around the edge of the hole.
See figure 2
Rear of cavity
Pt. No. 101520
Pt. No. 40C1201
Figure 1(a)
Pt. No. 40C1201
Figure 1(b)
Note: Ensure wave trap is fitted
correctly and not caught
around the edge of the hole.
Figure 2
APPENDIX 5: Hot air motor replacement procedure 2