User's Manual

9
AIR OUTLETS
These vents on the rear panels enable air which
has been used to cool internal components to
escape. It will not allow microwave energy to
escape into the environment. They must be kept
free from obstruction.
OVEN CAVITY
The cavity is constructed from stainless steel and
vitreous enamelled panels. It must be kept clean
(see CLEANING).
CONVECTION FAN and GREASE FILTER
The fan draws air over the heating elements and
into the cavity over the edges of the rear grease
filter, producing perfect heat distribution for combi-
nation cooking. The metal grease filtergrill covering
the fan must be kept clean and free of debris (See
CLEANING)
AIR INLET FILTERS (LEFT & RIGHT)
Situated at the left and right hand side of the base at
the front. These are part of the ventilation system
and must be kept free of obstruction and cleaned
on a daily basis.
DOOR HANDLE
This is a rigid bar which is pulled downwards and
towards you to open.
CONTROL PANEL
See page 10.
ON/OFF SWITCH
When switched ON, the control panel will illuminate.
The fan and ventilation system will also operate.
RATING PLATE
Found on the rear panel, this states the serial
number, model type & electrical specifications.
DOOR
This is a precision-made energy barrier with three
microwave safety interlocks. It must be kept clean
(see CLEANING section). The door should NOT be
used to support heavy dishes.
DOOR SEALS
These ensure a tight seal around the door. They
should be kept clean and checked regularly for
signs of damage. At the first sign of wear they
should be replaced by a Merrychef approved Service
Agent.
STEAM VENT (on rear of oven)
This enables steam to escape and prevents build
up of condensation. It will not allow microwave
energy to escape.
MenuKey 2
Changes the programs on the oven.
1
2
3
4
5
7
8
9
10
11
12
MAIN FEATURES
6
3
6
5
2
4
12
11
7
8
9 10
1
Rear view