User guide

13
OPERATING INSTRUCTIONS: MANUAL MODE
The oven can be operated in manual or
programmed mode. It is important to
understand manual mode prior to
attempting the development of a
pre-program operation.
See item 3 in USING THE OVEN FOR
THE FIRST TIME 2 to enable this
feature.
Press PREHEAT pad to heat the oven up to its
pre-set temperature this will take approximately
20 minutes.
The display will show the current oven cavity
temperature.
The display will show READY TO COOK when
cooking temperature is reached.
1
2
WARNING:
DO NOT APPLY MICROWAVE ENERGY WHEN OVEN IS EMPTY
DO NOT USE THE OVEN WITHOUT
CLEAN AIR FILTERS IN POSITION
To familiarize yourself with the controls place a heatproof bowl
containing approximately 1.5 litres of water in the oven.
Taking all the necessary precautions to
ensure you do not burn yourself, place the
food into the hot oven cavity and close the
door.
Press START Pad to begin cooking
Always keep the period that the door is open
to a minimum.
4
5
The timer will now count down.
When the remaining time reaches
zero an audible signal will be given.
Open the door and remove the food
from the cavity.
Switch the oven ON
The Merrychef Logo and Oven data display
briefly followed by OVEN COLD standby.
READY
TO COOK AT 235°C
Run Prog
Manual
Increase or decrease the fan speed
( in 10% steps) using the up/down arrows
e.g press down arrow 3 times, 35%
To enter cook menu press Manual function pad
3
Manual
OVEN COLD
PRESS PREHEAT
COOKING
COMPLETE
To change FAN SPEED
Enter a time using the number pads
e.g. 2 minutes 35 seconds
Increase or decrease Microwave power
(in 10% steps) using the up/down arrows
e.g. press up arrow twice, 70%
To change Microwave POWER
To enter the cooking time:
00.00
FAN: 50%
POWER: 50%
02.35
FAN: 50%
POWER: 50%
02.35
FAN: 35%
POWER: 50%
02.35
FAN: 35%
POWER: 70%