User guide

12
RUNNING A PROGRAM
Using number pad keys to run a program
Programs 0 to 499 can be recalled using the number pad keys.
The following procedure should be used to activate these programs.
Press the number pad you wish to activate (0-499)
The program number and total cooking time appear on
the display.
The program will now operate with the
total remaining time displayed counting
down on the display
(all stage time added together).
When the time reaches “00:00” the
display shows cooking completed and
audible signal will be given.
Remove the food from the oven and close the door.
example: Program 08
Press PREHEAT Pad to heat the oven up to its pre-
set temperature this will take approximately 20
minutes.
The display will show the current oven cavity
temperature
The display will show READY TO COOK when
cooking temperature is reached
1
Switch the oven ON
To enter cook menu press Run Prog function key
3
Run Prog
2
Taking all the necessary precautions to
ensure you do not burn yourself, place the
food into the hot oven cavity and close the
door.
Press START Pad to begin cooking
Always keep the period that the door is open
to a minimum.
4
Programs can be halted and cancelled at
any time by pressing the CANCEL key.
Note:
When the cycle is interrupted or
stopped the oven will remain at
the pre-set temperature and the
food inside the oven will
continue to cook
OVEN COLD
Press Preheat
COOKING
COMPLETED
example: 2minutes 35seconds
READY
TO COOK AT 250°C
Run Prog
Manual
READY AT 250°C
RUN PROGRAM _ _ _
READY AT 250°C
RUN PROGRAM _ 08
PROGRAM 008
PROGRAM NAME
02.35
If the Manual & Run Prog options do not appear the
oven is set to Program Mode see SETTING UP THE
OVEN 2
Hot surface
hazard