User guide

11
Switch the oven ON and immediately
press the Profile function pad to edit the
oven operating profile.
( Note: this screen is available
for 5 seconds )
2
3
Switch oven OFF
1
USING THE OVEN FOR THE FIRST TIME 2
The oven returns to cold standby mode.
OVEN COLD
PRESS PREHEAT
The oven profile sets the following factors: operating temperature ( Centigrade or Fahrenheit ), Oven Mode,
Program protection, Bleep sound & Cool down warning language.
To change the oven profile:
merrychef
Edit Preheat Profile
Profile
OVEN MODE
PROGRAM
Change Next
The display shows the current Oven mode.
PROGRAM
The oven can only be used for preset programs
manual controls are disabled
PROGRAM/ MANUAL*
The oven controls can be used directly
and for preset programs
4
TEMP SCALE
°C
Change Next
The display shows the current Oven temperature scale,
Centigrade °C or Fahrenheit °F.
5
PROGRAM PROTECTION
OFF
Change Next
Program Protection
ON Prevents pre-set programs from being altered.
OFF Allows programs to be edited.
6
SOUNDER VOLUME
5
Change Next
Sounder Volume
The length of the audible warning ‘bleep’ volume can be
adjusted from 1 to 5 (maximum).
7
LANGUAGE
ENGLISH
Change Next
Cool down warning ( Display )
ENGLISH
ENGLISH/ SPANISH
Next
Next
Press the NEXT function pad to continue.
Press the NEXT function pad to continue.
Press the NEXT function key to continue.
Next
Press the NEXT function key to continue.
Next
Press the NEXT function key to continue.
Next
To select a profile press the Change function key to
cycle through the options. Press the Next function pad to
select the option and move to the next step.
*Please note: PROGRAM/ MANUAL MODE should only be
used to establish programs as it allows oven settings to be
altered. Most users are advised to use PROGRAM mode