OWNER’S MANUAL LSC1100M LEAF SHREDDER-CHIPPER ASSEMBLY AND OPERATING INSTRUCTIONS This binomial contains formation concerning: proper-and improper operating procedures, warnings, maintenance, troubleshooting, assembly antipasti: Everyone whe operates this making shareholding these instructions and be thoroughly familiar with them, THIS MACHINE IS CAPABLE OF INFLICTING SERIOUS INJURY IF OPERATED IMPROPERLY. READ ALL WARNINGS AND CAUTION LABELS MACKINAC, INC. P.O.
SAFETY This symbol points out important safety Instructions, which, if notfollswed, souls islander the ampersand safety landlord propped of yourself and others, Read and follow all instructions by his-manual before contemplating to operate your teal hog. Failure o comply with these instructions may result in personal injury. When you see this symbolized its warning. THIS MACHINE 1S CAPABLE OF INFLICTING SERIOUS INJURY IF OPERATED IMPROPERLY. READ ALL WARNINGS & CAUTION LABELS.
MAKE CERTAIN THAT ALL SAFETY LABELS ON THIS EQUIPMENT ARE KEPT CLEAN AND IN GOOD CONDITION. IF YOU NEED REPLACEMENT LABELS, ORDER BY PART NUMBER. EE ED. “E.R. A CAUTION A ROTATING CUTTING BLADES KEEP HANDS AND FEET OUT OF DISCHARGE AND ISLET OPENING WHE E MACHINE iS RUNNING.
fam MADE IN US. A.
TRAINING Read this. owner's manual carefully in its entirety before contemplating fo assemble or operate this machine: Be completely familiar with the: controls and he proper use of this machine before operating 1. Keep this manual in a sale place for full ire and regular reference and for ordering replacement parts. OPERATOR'S RESPONSIBILITY Never allow children to operate your leaf shredder-chipper, nor adults lacking the proper instruction.
OPERATING PROCEDURE Only operate your leadership-chipper from the perorations. OPERATOR ZONES Know how to turn the unit:off. Never clear discharge area while unit Is running. Hereafter leaf shredder-chipper ig shut off, then use a long handled tool to-clear area. Never clear discharge-area with hands, feet, or another part of your body. Never move your leaf shredder-chipper or leave it unattended with the engine fanning.
REPAIR AND MAINTENANCE SAFETY Never operate: your leaf shredders chipper in poor mechanical condition or when in need of repair. Periodically check that all nuts, bolts, sowers, dnd belts are tightened to specifications. Be sis all safely guards and shields are in the proper position. These safety devices-are for your protection. Don’t service or repair your Leaflet shredder-chipperwithout removing the spark plug wire, Replace bid; damaged or worn pans such as bolts:or guards immediately.
5. Neap your face and body away front the feed hopper io avoid indestructibly any material that may bole back, Do not-ovarneash. Keep proper balance and footing. 6. Transportation the shredder while the engine is 7. Deodorization the arginine while iris hot, warm or running. 8. Do not cover the machine while the muffler is still hot. 9. The engine must be kept clear of deb and other acclimatization. WARNING: This unities equipped with an infernal combustion engine and should fot be.
PACKAGE CONTENTS TON BAGGILY Us MACHINE DITHERERS MANUAL ABA VIES HEX WI HES CHARGED ODER i EA: 5718 FENDER B16 FRED DER HS 4 = 538 SURETY GLASSES LRA SCALE GULLIBLE DISCHARGE FLAP BOLT BAG ASSEMBLY INSTRUCTIONS Your leaf shredder-chipper has been shipped with the basic unit: Completely assembled, leaving holy the discharge cover and feed hopper assembly. Before beginning assembly, make:sure all parts have been received and gran good condition.
Attaching the Discharges Cover T. Coder kick stand dnd put entire anti into night position, & Attached oratorio of the discharge cover with Sibyl-18XWE HHCE(T ind 8 tender washer (3), 3. Attach he op of the cover with a 5118-18 XW HHS 1) and & cable glide (2). Position the cable guide as shown 1A the: picture, The cable glides help fo ROOMY this collection bag i place. Push top iota rubber discharge cover inside metal housing. Repeatability and 4 tithe other side.
LUBRICATION & ENGINE START UP FOR INFORMATION ABOUT OIL AND FUEL, STARTING AND STOPPING PROCEDURES, RECOMMENDED MAINTENANCE, SERVICE, STORAGE AND ENGINE WARRANTY INFORMATION, REFER TO THE ENGINE OWNERS MANUAL. THE ENGINE HAS BEEN SHIPPED DRY. BE SURE TO SERVICE THE ENGINE ACCORDING TO THE ENGINE OWNERS MANUAL PRIOR TO STARTING. FAILURE TO DO SO CAN RESULT IN DAMAGE NOT WARRANTIED BY THE ENGINE MANUFACTURER. WARNING: Do not fil inheritances 12:neh from the top of the fis! tank (3 fervent spills and io.
OPERATION The leaf shredder-chipper is designed for three different methods of operation: 1. Shredding leaves. in lowered position. 2: Shedding leaves in the upright position: 3. Chipping sticks and branches. WARNING: THE SHREDDER-CHIPPER DISCHARGES MATERIALS WITH CONSIDERABLE VELOCITY. KEEP AWAY FROWN THE AREA AROUND THE DISCHARGE COVER. ALWAYS STOP THE ENGINE AND DISCONNECT THE SPARK PLUG WIRE WHEN REMOVING GR ATTACHING THE BAG, WHEN CHANGING CONTAINERS, OR WHEN REMOVING THE SHREDDED MATERIAL.
DO NOT OPERATE IN LOWERED POSITION FOR MORE THAN 30 MINUTES CONTINUOUSLY. Te lower the hopper assembly, grasp'the handles at the top of the hopper assembly and push forward and down. The kick stand symptomatically fold up and out of the way. Lower the hopper 16 the grouting. Stalks or heavy branches up fo In diameter ate fo be fed inch the patriarchate, See Figure 8. NOTE: DO NOT USE THE CHIPPER TUBE WHEN THE UNIT 15 IN THE DOWN POSITION.
MAINTENANCE SECTION ihe cutting mechanism statesmanlike foreign objector i your machine should start making an unusual noise or vibrating; stop the engine, disconnect spark plug wire from the spark lug. Allow the engine {econ before: 4. Inspecting for obvious damage. b. Checking for loose partisan tighten:to assure:continued safe operation. ¢. Replacing or repainting any damaged parts. + The engine governor sifting. on your machine must not be altered, changed or tampered with.
SHARPENING OR REPLACING CHIPPER KNIFE Disconnect spark plug wire and move'it away from spark plug, Remove strengthen as instructed in previous section, Remove the shipper chute by removing three Nex nuts ahd washers. A 1/2" Wrench is required. Rotate the impeller assembly by hand until collocate the chipper knife in the chipper chute opening. Remove the knife using a 3/18" Allen wrench on the outside of the blade and 1/2% wrench on the impeller assembly (inside the housing), See Figure 11.
SERVICE RECOMMENDATIONS SERVICE RECORD SCHEDULE SERVICE DATES il i dates 05 vou CRINOLINES. TOGA mii Fiat | tors] Every Geog | Bogie | Beth 5 {Bad | 88:1 0 Tab Bach Stops Hours] Us | Hours| Hus |.
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE(S) CORRECTIVE ACTION Engine fails to start | 1. Lusitania empty, or stale fuel. 1. Fill tank with clean, fresh fuel 2. Spark:plug wire disconnected, 2. Connect wire to spark plug. 3. Faulty spark plug. 3. Clean, adjust gap or replace. Loss of power; 1. Spark plug wire loose. 1. Connect and tighten spark plug operation erratic 2. Unit running on CHOKE, wire: 3. Blocked fuse line allegorist fuel. 2. Move thole lever to RUN position. 4, Water or dirt systemically. 3.
LIMITED WARRANTY Any product manufactured by Mackinac; Ing. and found, ninths judgment of Mackinac, tne, to be defective in: material -of workmanship, will be: repaired or replaced by an Authorized Mackinac Service Dealer without charge for parts abd labor 10'the original WNW of the Mackinac product. The Mackinac product including any defective part must be returned to an Authorized Mackinac Service: Alar within. the warranty period: The.
