User's Manual
5
2. Turning on and off the headset
To turn on the headset
1. Press POWER key about 2.5 seconds.
2. Release the power key after the blue LED start to flash.
3. The headset will enter paring mode automatically when you turn it on at the first time. If
the headset has been paired with any equipment, it will automatically search and link the
equipments have been paired.
To turn off the headset
1. Press POWER key about 2.5 seconds.
2. Release the Power key until the blue LED stop flashing
3. Pairing the headset (pairing mode)
Before use the headset, please pair with mobile phones or other device first.
How to pair (pairing step):
1. Confirm the headset is turned off
2. Keep pressing Power key above 4 seconds
3. Release Power key until blue LED flashes quickly
4. After Step3, the headset is reachable for your device.
5. Start to search the name”BHC902.D” in your device.
6. After the name”BHC902.D”is searched, please choose pairing and linking, the Pin code
is”0000”.
Remark: When the headset enter pairing mode, without paring and linking with any device after three
minutes, it will enter connectable mode or turn off automatically.
(If there is no any pairing record, the headset will turn off or enter connectable mode)
4. Charging and LED indication
It will start to charge after connect the headset and computer by micro USB. The headset will show
red LED when start to charge. The LED light will turn to blue after the battery is full.
Notice:
1. Please start to charge after the headset is off
2. The headset will show blue LED except charging and low battery mode.
5. Other information
1. For power saving, there is no LED indication when it is in standby mode. Please press any key
to make sure the headset is on or off. If the headset is on, the blue LED will flash for one
second.
2. When the headset is in low battery and standby mode, the red LED will flash quickly per 2.5
seconds. All LED indication will turns to red (including streaming and talking….etc.).
Press and Hold to Turn on/off Headset