×2 ×2 ×2 ×2 ×2 ×1 × 32 ×1 G M6×30 ×1 M6×20 ×4 • Assemble in a flat location to check for alignment and stability. • For best results, at each step, place all bolts and only tighten them 50%. • Fully tighten all bolts after assembling the piece completely. • For best results, tighten gradually using the provided hex wrench rather than using power tools. • If you find after installation that the piece is unstable, loosen the fittings and reinstall them again as described above.
