Use and Care Manual

6
Maintenance
• Unplug your machine and ensure it has completely cooled before starting any cleaning,
maintenance, or repair.
• Check the parts of your machine for any wear or damage after use. Repair or replace any
problematic parts before further use.
• Clean the exterior of your machine periodically. Using a dry towel is recommended. If a
damp towel is required, unplug the machine, take care not to get water onto any electronic
components, and wait for the cleaned area to dry completely before the machine’s next use.
Never immerse in water and do not use caustic chemicals or harsh abrasives.
• Store this heat press in a location protected against unauthorized use, especially by children.
If it will not be used for an extended period of time, close the platen and store in a cool dry
place out of direct sunlight and inaccessible to children.
Troubleshooting
Possible Problems Common Solutions
Burnt or blurry images
Decrease the operating time, temperature, and/or
pressure.
Faded or colorless images
Increase the operating time, temperature, and/or
pressure.
Contact Us
Thank you for choosing our products! If you have any questions or
comments, contact us at [e-mail] and we'll resolve your
issue ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.