Use and Care Manual

1
Safety Information
• Use this device ONLY in accordance with these instructions and for its intended purposes.
• ONLY use with stable compatible electrical sources, connected via a grounded 3-prong power
outlet. Ensure that all plugs are securely fastened and the machine is protected against any
possible surges in the line. Do not place other electrical devices on the same circuit. Do not use
a 3-to-2 prong adapter or ungrounded power strip. If this device is used with an extension cord,
ensure that its gauge can handle the power for this device without overheating and do not coil
the cord during use.
• DO NOT allow people unfamiliar with this device or these instructions to operate it. Do not let
children or persons with compromised physical or mental capabilities use this device without
training and close supervision. Exercise caution when using near any bystanders and/or pets.
Store out of the reach of children.
• DO NOT use this device while you are tired or under the infl uence of drugs, alcohol, or medication.
• Keep your work area clean and well lit. Cluttered or dark areas invite accidents.
• DO NOT operate this device in areas fi lled with explosive or fl ammable gases, liquids, or dust.
ALWAYS keep this device away from any explosive materials such as gasoline, ethanol, lighters,
batteries, chargers, fi recrackers, and aerosol cans. Exercise caution during use on or near fabric
objects, avoiding prolonged heating which might ignite the material. Keep a fi re extinguisher
nearby in case of accidents.
• Heat your substrate ONLY on the heat resistant mats placed on the sliding base. Close the
press completely before heating begins. Do not hold your substrate in your hand or against your
body during use.
• DO NOT touch any heated areas with any bare skin until allowing time for them to cool. Never
touch the plates while the machine is in use. Only use the handle and use extreme care while
removing your fi nished products. For best results, wear proper personal protective equipment
such as heat resistant gloves.
• DO NOT place other objects on this device at any time.
• DO NOT get this device wet or operate it with wet hands.
• ALWAYS remember to adjust the time and temperature appropriately for diff erent materials and
be careful not to confuse Celsius and Fahrenheit temperatures.
• DO NOT leave this device unattended during use. Someone should always be nearby to prevent
accidents and to respond to any emergencies.
• ALWAYS unplug this device before any cleaning, servicing, or storage. Do not move this device
by pulling on its power cord.
• DO NOT operate this device if it is damaged or shows signs of malfunction. Repair or replace
problematic components before further use. Never replace any parts with non-identical ones.
Warning!