Instructions / Assembly

V20200506
INSTRUCTIONS
ASSEMBLY
CONTACT US
Thank you for your purchase! If you have any questions or concerns, contact us at [e-mail]
and we'll resolve your problem ASAP. Customers are always the best teachers to keep us growing!
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box
(not included).
2. Take the wall bracket (C) off the canopy (D). Connect your wall bracket to your junction box using the
mounting bolts (B).
3. Make electrical connections using the wire nuts (A).
4. Being careful that no wiring is left exposed, place the canopy against to the wall surface. Secure the canopy
to the wall bracket with the 2 previously removed canopy bolts (E).
5. Install your bulb into the socket. This fixture has been rated for up to one E26 60-watt maximum bulb
(not included).
(D)
Wall Bracket (C)
Wire Nuts (A)
Junction Box
Canopy
Mounting Bolts (B)
Canopy Bolts (E)
Read these instructions carefully prior to installation.
● Check for electric, gas, and plumbing lines before drilling or consult a professional.
●
● Take care not to over-tighten the bolts for the glass shade.
WARNINGS
ALWAYS cut ALL relevant power before installing a lighting fixture, and do not restore power to the line until
the lamp has been FULLY installed.
DO NOT use with bulbs exceeding the recommended wattage.
●