Use and Care Manual

7
5SH Height Range
Press to
change the maximum and
minimum available heights.
is the base height of 70 cm and
cannot be changed.
can set a height low limit for the
desktop if desired.
can set a new upper height limit for the
desktop. It must be 115 cm or lower and
should be at least 10 cm greater than .
6Hc Height Control 01–02
Press to toggle between manual (01)
automatic (02) height control.
In manual mode, the and must
be held down to continue movement.
In automatic mode, pressing either button
begins continuous movement until any key
is pressed or the desk’s high or low position
is reached.
7H Bounce Height 05–20
Press
to change the desktop’s
bounce height from 5–20 millimeters.
8r
Restore Factory
Defaults
Press twice
to reset the desk to its
factory default settings. RES will be
displayed and the device should be reset
as above.
9d
Fatigue Test
Mode
PR_
This setting is only for product testing at the
factory.
⍓
⍌