Use and Care Manual
3
2. Connect the power cable (F) to the bed’s cable and to the power adapter (E). Plug the power
adapter into a power outlet.
3. Insert the footboard (B) into the frame, if desired.
4. Put your mattress over the frame.
5. Pair the remote (D) to your bed by pressing Pair twice and then holding it until you hear a sound.
6. The remote’s TV, reading, and sleep positions come unassigned. To assign the sleep
position, use Backrest Up, Backrest Down, Footrest Up, and Footrest Down to adjust the
bed to your desired position. Then press Sleep Position twice and then hold it until you hear
a sound. Repeat this for TV Position and Reading Position. The remote also comes with
an additional Position Memory which can be set to t whatever backrest and footrest angle
conguration you desire using the same procedure.