Setup Guide mermaid poseidon 150/170/190 TFT (Touch)
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1 Table of Content: Table of Content: .................................................................................................................................. 3 1. Content of the Boxes ...................................................................................................................... 5 • • • • Monitor Unit Box:.....................................................................................................
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1 1. Content of the Boxes Monitor Unit Box: • • • 15” or 17” or 19” unit equipped with: Front glass or optional touch (intelli touch) Optional keyboard mounted on the monitor assembly (country specific layout) Raiser Unit Box: • Raiser unit Base Unit Box: • • • Base unit consisting of: Cabinet with premounted door. Baseplate with premounted mains IEC breakout box, PC fixing straps and Accessories box.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1 2. Unpacking, Assembly and Placement Note: To avoid condensation, please wait ½-1 hour, before operating the unit. Base/Raiser unit: • • • • • • • • • After the base unit box has been opened, remove the upper foam inlay. Lift out the base cabinet by grabbing the center hole. Note: The cabinet is not secured to the base plate, so please take care that the plate still rests in the box.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1 Base/Raiser unit - continued: • • • • • • • • Mount the enclosed PSU in a suitable place on the baseplate, by use of the adhesive tape. Connect the PSU and PC to the mains breakout box, by use of the enclosed IEC extension cords. cabletie Collect the VGA-, PSU-, sound-, optional USB- and optional PS2 cables as a bundle and tie them together by use of the enclosed cable ties, as shown on the picture.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1 Base/Raiser unit - continued: • • • • Lift the cabinet/raiser assembly on top of the Cable entry base plate. Align the 3 holes in the cabinet with the corresponding threaded latches on the Grommet Strip base plate. Slide the cabinet down to the base plate just outside the center latch and one of the side latches. The cabinet will then stick to the top of the last side latch. Note: Be sure not to damage the Grommet Strip.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1 Monitor unit: Adjust cables as needed • • • • • • • Unpack and place the monitor unit on the floor, on one of the inlay foam pieces, with the front pointing downwards. Be carefull not to scratch the unit. Place the cabinet/raiser assembly in the inlay foam piece of the cabinet packaging, and lay down this unit as well. Place the opening of the raiser as close to the monitor unit as possible.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1 Door: • Open the door by turning the key anti clockwise. Use the key as “handle” Note: The key can only be removed when the lock is in the locked position. • The door is intended to be used as access door to the front of the PC; eg. making it possible to operate the drive(s). But it is also possible to mount the PC in opposite direction, making it possible to access the backside of the PC instead. Unlock Lock 3.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1 4. OSD Key Functions (Overview) For detailed description: See Users manual. 4-button OSD Panel Auto Config: (Hot key) Source select: (Hot key(s)) Volume Dec. : (Hot key) Volume Inc.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.1 5. Maximum size of build-in PC Foot print dimensions : Ø 480 mm Maximum size PC / Laptop: 330 x 300 x 100 mm (W x L x H) (with respect for connections / plugs) PC restrainers 2 pcs. - adjustable.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.
mermaid poseidon 150/170/190 TFT (touch) Models - Setup Guide ver 2.
Klingseyvej 15 B 2720 Vanløse Denmark Phone: +45 44 52 92 00 www.mermaid.
