Manual

rel lug hinge pin recess, and rotate the barrels upward to close the action.

Release the top lever at this time.

Pivot the forearm assembly onto the barrels. Align the forearm in its proper

position on the barrels and push the forearm lever upward into its housing.

This locks the forearm back into its original position on the barrels.

Figure 10-Barrel Assembly

ATTENTION! While assembling your firearm, do not use excessive

force when closing the action! If the action and barrels are not aligned

properly, excessive force applied during assembly can deform or mar the

fitted surfaces of the firearm. If you perceive any interference while

installing the barrels to the receiver repeat the assembly procedures from

beginning, and be extra careful to align the barrel lug hinge pin recess

and the receiver hinge pin properly. If you continue to experience diffi-

culty in the assembly of your firearm, call GSI or seek assistance from a

qualified gunsmith.

GAUGE, CALIBER, CHAMBER LENGTH

AND

CHOKE DESIGNATION

It is most important that the correct ammunition is used with your

firearm. Use of incorrect ammunition with your firearm could cause

injury or death to the shooter and damage to the firearm. Never use