Manual

Figure 6 - Removal of Forearm
protective lubricants from metal parts on the receiver and barrel assemblies.
Remove the forearm from the barrels by pulling the forearm latch out and
away from the underside of the forearm (See figure 6). Remove all protective
lubricants from the exposed metal surfaces with light gun oil and a cleaning
cloth. After cleaning, place a couple of drops of gun oil on the metal bearing
surfaces of the hingepin, barrel lugs and on the forearm bracket (see figure 1).
The barrels are attached to the action by grasping the stock grip with the fir-
ing hand and supporting the buttstock in between the firing elbow and body
(See figure 7). Grasp the barrels with the non-firing hand and connect the
barrel lug with the receiver hinge pin. Use the thumb of the firing hand to
move the top lever sideways to its most right position.
Figure 7 -Barrel Assembly
18