Manual

Figure 3 - Barrel Selector on Single Trigger Shotguns
TOP LEVER
The top lever operates the locking bolt, which securely aligns and clasps
the barrel assembly shut to the receiver for firing. The locking bolt and
barrel lugs are designed for gradual wear of locking surfaces and may
therefore exhibit tight fitting characteristics during initial use. The close
tolerances of these locking surfaces ensure that the breech of the shotgun
remains tight throughout use.
When closing the breech of the action let the top lever move freely to
its locked (in line with the safety) position (see figure 5). Do not restrain
its travel with your thumb.
It is recommended that the top lever be indexed to the left in its locked
position with slight finger or thumb pressure to make sure that the bolt is
fully closed. If the bolt does not fully close it is possible dirt or debris
have accumulated to a level preventing full closure of the breech. In
this condition open the action and unload the shotgun. Carefully
inspect the action and remove any dirt or debris. Keep the breech surface
clean and lightly lubricated.
15
Barrel
Selector