User manual

BACK PANEL CONNECTIONS

When you first power up LVX, you will enter the Preset Page. By default, LVX is shipped in “GRAPHIC VIEW”. In GRAPHIC VIEW,

3 knobs are your navigation controllers: C1, C2, C3. The Preset Page consists of a preset bubble that contain the name and num-

ber. 2 FAVORITE PARAMETERS are controlled by C1 and C2 (located directly above the controllers). (You can assign your favorite

parameters per preset, to either the L or R side. Changes of the 2 favorited parameters are located in the SAVE AS PAGE.

Details ahead.

CONTROLLER 2 (OR C2)

Turn C2 knob to edit

favorite parameter assigned

to the R side.

CONTROLLER 3 (OR C3)

Turn knob to navigate thru

1-99 presets (33 banks of 3).

- PRESET PAGE (GRAPHIC VIEW)

POWER SUPPLY

9VDC center-negative power and

at least 300mA of current to the

2.1mm power input required.

USB-C

Used to connect to computer

for firmware updates only.

EXPRESSION PEDAL JACK

realtime control of multiple

parameters simultaneously.

LINE/SYNTH LEVEL

Indicator LED is lit

when enabled.

5 PIN DIN MIDI I/O JACKS

CONTROLLER 1 (OR C1)

Turn C1 knob to edit favorite

parameter assigned

to the L side.

NOTE: GRAPHIC VIEW is designed to focus on 1 block and/or 1 parameter at a time per preset. (You have the option to switch to

“TEXT VIEW” in GLOBALS -> EDIT PAGE. Favorite Parameters are also available in TEXT VIEW.