Installation guide
Table Of Contents
- Contents
- Index
- A
- B
- C
- D
- F
- G
- H
- M
- P
- R
- S
- T
- V
Configuring
the DVD player
43
To calibrate the speaker layout (G91A only)
• Highlight Calibration… in the Speakers menu, and press
Enter.
The Calibration menu will be displayed:
• Highlight Distance units and press Enter to change the
distance units between cm and inches.
Then for each speaker adjust the Gain and Distance as follows:
• Press V to highlight the Gain figure and press Enter to edit it.
You will hear a noise test signal from the corresponding channel.
• Press V or A to decrease or increase the gain in 0.5dB steps,
and press Enter to confirm it.
Adjust the Gain values so all the speakers sound equally loud at
the listening position.
• Press V to highlight the Distance figure and press Enter to
edit it.
• Measure the distance from the listening position to the speaker
and enter the value using the V or A keys, or the MSR+ number
keys, and press Enter to confirm it.
• Press Return when you have entered the values for all the
speakers.