Installation guide

Select this option For this application
Aux To connect the DVD player to a pair of DSP loudspeakers or a digital surround controller via the AUX DIGITAL
output.
Main 2Ch To connect the DVD player to a pair of DSP loudspeakers or a digital surround controller via the L/R MAIN DIGITAL
output.
Main MCh To connect the DVD player to the multichannel inputs of a Meridian digital surround controller via the L/R,
C/LFE, and SURR MAIN DIGITAL outputs.
HDMI 2Ch To connect the DVD player to a 2-channel HDMI receiver.
HDMI MCh To connect the DVD player to a multichannel HDMI receiver.
Configuring
the DVD player
36
The Audio setup menu lets you select the audio settings of the
DVD player.
• Highlight Audio setup… in the Setup menu, and press Enter.
The Audio setup menu will be displayed:
The Speakers… option only appears on the G91A.
DVD player application
The options on the Application menu allow you to configure
the audio outputs for optimum performance, depending on the
capabilities of the equipment you are connecting to. For more
information about the applications see
Applications , page 11.
• Highlight Application in the Audio setup menu, and press
Enter.
The Application menu is displayed. The options are different for
the G91A and G98.
To specify the application for the G98
On the G98 the Application menu provides five options:
These are explained in the following table:
Configuring the audio