Installation guide

Installing the
DVD player
15
To create a digital surround system with a G91A ( Type 6)
$30LOUDSPEAKERSLAVE
$30LOUDSPEAKERSLAVE
!NALOGUESUBWOOFER
3PATCHBOX
$30#
MASTER
#/--3
/54054 ).054
$)')4!,).0543

3,%!$
3,%!$DIGITALUNUSED 3,%!$
-,%!$
$)')4!,
/54054
#/--3
/54054
).054
$)')4!,
).0543


$)')4!,
/54054
#/--3
/54054 ).054
$)')4!,).0543

$)')4!,
/54054
!.!,/'5%
/54
#35"
'!$6$!UDIO0LAYER#ONTROLLER4UNER
#/--3
-!).
$)')4!,/54
).054
The G91A includes all the digital surround decoding needed to
create a 5.1 surround system, directly connected to up to six DSP
loudspeakers.
• Use the Comms part of an M5 lead to connect one of the
COMMS sockets on the G91A to the digital speaker you have
chosen as the master (typically the centre speaker).
• Use the audio part of the M5 lead to connect the digital speaker
to the appropriate digital output socket.
If the system includes more than two Meridian DSP loudspeakers
you will need a 511 S-patch box (available separately) to link
together the S5 leads from each speaker.
• Connect the COMMS output from the master digital speaker to
one socket on the 511 using an S5 lead.
• Link each pair of speakers together with an S5 lead, out of
the first speaker and into the second speaker, as shown in the
diagram for the main left and right speakers.