Installation guide

To connect to a surround processor with multichannel analogue inputs eg G68 ( Type 3/4/5)
COMMS LEAD
AUX
DIGITAL
OUT
ANALOGUE
OUT
COMMS
G98AH DVD Audio Transport
6 x PHONO LEADS
DIGITAL LEAD
G68 Digital Surround Controller
MULTI AN IN
DIG IN
COMMS
• Connect the ANALOGUE OUT sockets from the G98AH to the
analogue multichannel inputs on the surround processor.
• Optionally connect the AUX DIGITAL OUT socket to the surround
processor’s digital input, using a digital phono lead.
This gives you the option of decoding Dolby Digital and DTS
bitstreams using the surround processor.
If the surround processor is a Meridian product connect together
the COMMS sockets using the Comms lead provided.
• Configure the DVD player to Type 3, 4 or 5, depending on the
video configuration; see
Resetting the DVD player , page 27.
Installing the
DVD player
14
To connect to a surround processor with no multichannel input eg 561 (Type 2)
Digital surround processor
PHONO LEAD
DIGITAL
OUT
G Series DVD player
DIGITAL INPUT
If your digital surround processor does not provide a multichannel
input, and is 48kHz max with no MHR:
• Connect the MAIN DIGITAL OUT L/R (G91A or G98DH) or AUX
DIGITAL OUT (G98AH) to the DIGITAL IN on the digital sound
processor.
If the surround processor is a Meridian product connect together
the COMMS sockets using the Comms lead provided.
• Configure the DVD player to Type 2; see
Resetting the DVD
player
, page 27.