M E R I D I A N I G S E R I E S N S T A L L A T I O N D VD P G UIDE L A Y E R
G Series DVD Player Installation Guide
ii Preface Important safety instructions • Read the instructions. • Keep these instructions. • Follow all instructions. • Do not use this apparatus near water. • Clean only with a dry cloth. • Install only in accordance with the manufacturer’s instructions. • Refer all servicing to approved service personnel. To avoid overheating • Leave at least 10cm around the equipment to ensure sufficient ventilation. Do not position the product: • In direct sunlight. • Near heat sources, such as a radiator.
iii Contents Introduction Contents 1 Configuring playback options Provides information about the DVD player models, a Explains how to use the options on the Setup menu to description of each product, and technical specifications. configure the playback options of the DVD player.
iv Preface Copyright and acknowledgements Sales and service in the UK Sales and service in the USA Meridian Audio Ltd Meridian America Inc Latham Road 8055 Troon Circle Huntingdon Suite C Cambridgeshire Austell PE29 6YE GA30168-7849 England USA Tel +44 (0)1480 445678 Tel +1 (404) 344 7111 Fax +44 (0)1480 445686 Fax +1 (404) 346 7111 World Wide Web – http://www.meridian-audio.com/ This guide was produced by Human-Computer Interface Ltd, http://www.interface.co.
1 Introduction Introduction This guide provides full information about unpacking the DVD player, connecting it to the other equipment in the system, and configuring it using the front panel. Once you have connected and configured the DVD player, refer to the G Series System Guide for information about operating it. DVD player models complete high-quality two-channel DVD system (Type 1; see page 11). The G Series includes three models of DVD player.
2 Introduction In stereo mode, the G91A is designed to connect directly to a conventional analogue amplifiers and speakers – or a combination pair of analogue active speakers, or power amplifiers and passive of the two. Here the G91A really comes into its own: as the heart speakers. Alternatively, it can be connected to a pair of Meridian of a complete surround system. DSP Loudspeakers to create a complete two-channel AV system.
3 Introduction Unlike other players that use a mechanical approach to try to lower jitter by minimising drive vibration, the G Series DVD players employ a triple buffering system to minimise jitter, maximizing HF transparency and sound stage precision and stability. The result of this sophisticated effort is that the players deliver ultra-low jitter, with sound and picture quality second only to Meridian’s 800 Reference DVD/CD Player.
4 Introduction control which allows the user to minimise noise on a received Digital surround decoding (G91A surround application signal. The AM option provides LW/MW reception and includes only) DSP-based low-pass and whistle filters for improved AM reception. In addition, the G91A incorporates digital surround decoding to allow the multichannel analogue and digital outputs to be Upsampling (G91A only) used to drive a basic 5.
5 Introduction main left and right speakers and subwoofer), or PLII (recommended to provide a single video output for all the video sources in the for movies), using the DSP key on the front panel or MSR+. system. A bypass function allows progressive or high definition component video to be routed directly to the component output The default preset is Trifield for audio CDs, two-channel DVD-As, only.
6 Introduction Specifications Inputs/outputs Audio inputs G91A G98DH G98AH Analogue: 3 stereo inputs, unbalanced 0.5-2.5V on None. None. phono. Digital S/PDIF: 2 stereo coax inputs and 2 stereo TOSlink optical inputs. Digital MHR SmartLink digital output on 3 digital coax outputs or 15-pin D-type connector. 1 aux digital coax, 1 aux outputs Aux digital coax output. optical. Analogue 6-channel analogue output, fixed or variable outputs 1-99 in 1dB steps, 3V RMS, 47Ω.
7 Installing the DVD player Installing the DVD player This chapter explains how to install the DVD player. It describes what you should find when you unpack the product, and how you should connect it to the other equipment in the system. You should not make any connections to the product or to any other component in the system while the AC power supply is connected and switched on.
8 Installing the Audio connections All the G Series DVD players provide a digital output, suitable for The G98 is available with either a multichannel analogue output connecting to a pair of Meridian DSP loudspeakers or a surround or a multichannel digital output for connection to a surround controller. controller with multichannel inputs such as a G68. The G91A provides both multichannel digital and multichannel analogue outputs.
9 Installing the DVD player Multichannel analogue output (G98AH) 3 !58 #/-0/3)4% 6 6#2 #/-0/.%.4 /54 9 6 46 0B 3 '!-% ($-) /54 3!4 0R -!).4%.!.#% 23 42)''%2 )2 ). -%2)$)!. #/--3 /. /&& 6 M! 9 0B /54 /54 9 0R ' $6$ !5$)/ 0,!9%2 ,%&4 #%.42% 3522 , $%3)'.%$ !.$ -!$% ). %.',!.$ "9 -%2)$)!. !5$)/ ,4$ $%3)'. !.$ #/092)'(4 6/,4!'% 4%34%$ 3%2)!, .5-"%2 2)'(4 ,&% !.!,/'5% /54 #!54)/. 2%0,!#% 7)4( 3!-% 490% &53% 4 !, 6 FOR 6 0/7%2 ).
10 Installing the DVD player Preamplifier and tuner connections (G91A) The G91A includes an integrated preamplifier, allowing you to it can be configured to provide a bitstream digital output, suitable connect up to seven external sources in addition to the DVD for connection to an external digital surround processor such as the player and internal tuner. This provides the option of six decoded G68 Digital Surround Controller.
11 Installing the DVD player Applications To connect to two-channel DSP loudspeakers (Type 1) $30 n -ASTER ' 3ERIES $6$ PLAYER #/--3 $)')4!, /54 $)')4!, ).0543 $)')4!, /54054 - ,%!$ G Series DVD players can be connected directly to Meridian DSP loudspeakers to create a complete compact stereo system, with volume and other preamplifier controls provided by the loudspeakers via the MSR+ or the front panel.
12 Installing the DVD player To connect the G91A to two-channel analogue variable (Type 0) 3PEAKER ' ! $6$ 0LAYER 3PEAKER ' ' 4WO CHANNEL 0OWER !MPLIFIER !.!,/'5% /54 ,%&4 2)'(4 " 0(/./ ,%!$ 0(/./ ,%!$ The G91A includes an integrated preamplifier, allowing you to connect it directly to a pair of analogue active loudspeakers, or to analogue passive loudspeakers via a power amplifier such as the G56 or G57.
13 Installing the DVD player To connect to a surround processor with multichannel digital inputs eg G68 (Type 3/4/5) ' $( $6$ !UDIO 4RANSPORT ' $IGITAL 3URROUND #ONTROLLER #/--3 #/--3 -5,4) $)' ). -!). $)')4!, /54 #/--3 ,%!$ X $)')4!, ,%!$3 The multichannel digital output is the preferred way of connecting to a 96kHz and MHR capable Meridian digital surround processor, such as a 568.2, G68, or 861, as it provides additional MHR SMART LINK information about the source format.
14 Installing the DVD player To connect to a surround processor with multichannel analogue inputs eg G68 (Type 3/4/5) G68 Digital Surround Controller G98AH DVD Audio Transport COMMS COMMS ANALOGUE AUX OUT DIGITAL OUT DIG IN MULTI AN IN COMMS LEAD DIGITAL LEAD 6 x PHONO LEADS • Connect the ANALOGUE OUT sockets from the G98AH to the If the surround processor is a Meridian product connect together the COMMS sockets using the Comms lead provided. analogue multichannel inputs on the surround processor.
15 Installing the DVD player To create a digital surround system with a G91A (Type 6) !NALOGUE SUBWOOFER $30 # MASTER ' ! $6$ !UDIO 0LAYER #ONTROLLER 4UNER !.!,/'5% -!). /54 # 35" $)')4!, /54 ).054 #/--3 ).054 #/--3 /54054 - ,%!$ $)')4!, /54054 $)')4!, ).0543 3 PATCH BOX 3 ,%!$ DIGITAL UNUSED 3 ,%!$ $30 LOUDSPEAKER SLAVE $)')4!, ).0543 $30 LOUDSPEAKER SLAVE $)')4!, ).0543 $)')4!, #/--3 /54054 /54054 ).054 $)')4!, #/--3 /54054 /54054 ).
16 Installing the DVD player • Configure the DSP loudspeakers as described in the Meridian DSP • Connect the inputs to the first speaker of each additional pair Loudspeaker User Guide. to the 511 (Comms) and the appropriate output of the G91A (audio), using an S5 lead. • Configure the DVD player to Type 6; see Resetting the DVD player, page 27. • Connect up to two analogue loudspeakers to the ANALOGUE OUT outputs. These can be L/R, C, Sub, C/Sub, or Rears.
17 Installing the Video connections DVD player #OMPOSITE INPUTS #OMPONENT OUTPUT ($-) OUTPUT 3 VIDEO INPUTS 3 6)$%/ 3 !58 #/-0/3)4% 6 6#2 #/-0/.%.4 /54 9 6 46 0B 3 '!-% ($-) /54 3!4 0R -!).4%.!.#% 23 42)''%2 6 M! )2 ). -%2)$)!. #/--3 /. /&& 9 0B /54 /54 9 0R -!). $)')4!, /54 -(2 3-!24 ,).+ 0!4%.4 0%.$).' -!). $)')4!, , 2 3522 # ,&% !58 ' $6$ !5$)/ 0,!9%2 $%3)'.%$ !.$ -!$% ). %.',!.$ "9 -%2)$)!. !5$)/ ,4$ $%3)'. !.$ #/092)'(4 6/,4!'% 4%34%$ 3%2)!, .
18 Installing the DVD player To connect using component video 4ELEVISION MONITOR ' 3ERIES $6$ PLAYER 3 6)$%/ #/-0 #/-0/.%.4 #/-0/.%.4 ). 6)$%/ ,%!$3 If your television, monitor, or projection system includes component video inputs, but no HDMI or DVI-HDCP, these will give the highest • Connect the appropriate component outputs from the DVD player to the component video inputs, using suitable video cables. possible quality from DVD-Videos.
19 Installing the DVD player To connect using composite video Television/monitor G Series DVD player 3 6)$%/ #/-0 #/-0/.%.4 COMPOSITE IN COMPOSITE LEAD • Connect the composite video output to a corresponding input on a television, monitor, or video control unit using a screened 75Ω The composite video output is always active, irrespective of the Video output setting. video cable. To connect using HDMI G Series DVD player 3 6)$%/ #/-0 Monitor #/-0/.%.
20 Installing the DVD player Using the G Series DVD player with a G Series Digital Surround Controller To connect to a G68D or G61 with video switching in the DVD player (Type 3) 'AME ' $ ' $IGITAL 3URROUND #ONTROLLER ' 3ERIES $6$ PLAYER 3 6)$%/ #/-0 ($-) #/--3 $)')4!, /54 / / /04)#!, 3 6)$%/ 3 6)$%/ ,%!$ /04)#!, ,%!$ #/--3 ! -5,4) $)' ). #/--3 ,%!$ 0(/./ ,%!$3 3ATELLITE RECEIVER #/-0/.%.
21 Installing the DVD player To connect to a G68ADV/AXV/XXV with video switching in the G68 and scaling in the G98DH (Type 4) ' !$6 !86 886 'AME 3 #/-0 6 /54 /54 3ATELLITE RECEIVER #/--3 9 ! ! $)' ). 9 / / /04)#!, 6)$%/ 6)$%/ ,%!$ /04)#!, ,%!$ #/-0/.%.4 6)$%/ ,%!$3 / /04)#!, ,%!$ 6#2 #ABLE !5$)/ #/-0/.%.4 6)$%/ 6)$%/ ,%!$ 0(/./ ,%!$3 !5$)/ 6)$%/ ,%!$3 0(/./ ,%!$3 ' $( $6$ !UDIO 4RANSPORT 3 6)$%/ #/-0 ($-) #/--3 $)')4!, /54 6)$%/ ,%!$3 0(/.
22 Installing the Communications connections )NFRA RED REPEATER INPUT $). #OMMS 4RIGGER OUTPUT ".# #OMMS 23 CONNECTION 3 6)$%/ !.4%..! 3 $)3# 3 !58 #/-0/3)4% 6 6#2 #/-0/.%.4 /54 9 6 46 0B !- 3 '!-% ($-) /54 -!).4%.!.#% 23 3!4 0R )2 ). -%2)$)!. #/--3 /. /&& 9 0B /54 /54 '.$ 9 0R , , -!). $)')4!, /54 $ &- / '!-% / 3!4 !58 3522 # ,&% !58 $ ! 46 !.!,/'5% ). !.!,/'5% /54 $)' ). ' $6$ !5$)/ 0,!9%2 $%3)'.%$ !.$ -!$% ). %.',!.$ "9 -%2)$)!.
23 Installing the DVD player To connect to other Meridian G Series, 500 Series, or 800 Series equipment G Series DVD player COMMS G Series, 500 Series, or 800 Series unit COMMS COMMS LEAD COMMS LEAD In a system of Meridian products the products should be linked All the other units will be configured as non-controllers, and together in a chain, via the COMMS sockets, using the Comms display: leads supplied with each product. The sequence in which you connect the units is not important. Not Con.
24 Installing the DVD player To connect FM and AM antennae (products fitted with AM/FM tuner) ' ! $6$ !UDIO 0LAYER #ONTROLLER 4UNER !- &- • Connect an FM antenna or split-flex dipole to the FM Coax For best AM results use an external AM antenna. connector, if necessary using the adaptor provided. Note: For AM you must fit a good ground as well as an antenna. In the UK use a female Belling-Lee (VCR) connector.
25 Installing the DVD player To connect DAB and FM antennae &- ' ! $6$ !UDIO 0LAYER #ONTROLLER 4UNER $!" $!" &- The DAB/FM tuner uses a single antenna input for both DAB and FM reception. For optimum reception we recommend using both DAB and FM antennae with an appropriate combiner. For DAB-only listening the supplied DAB antenna may be sufficient. However, in many areas an external or loft mounted DAB antenna will be needed to receive all the available stations.
26 Installing the DVD player
27 Resetting the DVD player Resetting the DVD player This chapter explains how to reset the DVD player using the front-panel controls. Resetting the product • Press Reset. The DVD player provides several alternative standard settings, The display shows: called Types, which configure all aspects of the product into the most commonly needed configurations.
28 Resetting the DVD player A description of each Type is shown on the top line of the display. As you select each Type the DVD player is reset to that Type. • Press IR to toggle between IR Auto (auto setup), IR Con (controller), and IR N.Con (not controller). When you have selected the Type you want: • Press Exit or On/Off to return to standby. • Press Exit or On/Off to return to standby.
29 Configuring the DVD player Configuring the DVD player This chapter explains how to configure the DVD player using the on-screen Setup menus. Alternatively, for complete control over all aspects of the product’s configuration you can set up the unit from a computer using the Meridian Configuration Program. For full information refer to the Meridian Configuration Program Guide available separately. Configuration • Press Setup.
30 Configuring the DVD player To select an option from a menu • Press V or A to highlight the option you want: • Press Enter to select the option. To return to the previous menu • Press Return. To exit from the Setup menus • Press Setup.
31 Configuring Configuring the video The Video setup menu lets you change the video settings of the the DVD player The Display aspect ratio menu is displayed: DVD player. • Highlight Video setup… in the Setup menu, and press Enter. The Video setup menu will be displayed: • Press V or A to specify the format of your TV, and press Enter. Note: The pan-scan feature is not available on some discs, in which case letterbox format will be used.
32 Configuring the DVD player If you are using the composite or S-video outputs of the DVD To select the TV standard player select the 7.5 IRE option. DVD-Video discs are produced in both PAL and NTSC television formats. The DVD player is capable of converting between formats, If you are using the component outputs select the option that to allow you to view DVD movies in either format even if your matches your display. television is not capable of displaying that format.
33 Configuring the DVD player To select the power up TV standard To select the screensaver options A separate Powerup std option lets you specify the standard to • Highlight Screensaver… in the Video setup menu, and press be selected when you bring the DVD player out of standby: • Highlight Powerup std in the Video setup menu, and press Enter. The Screensaver options menu is displayed: Enter.
34 Configuring the DVD player The appropriate menu is displayed: To set the scaler options These specify how the interlaced video signal from the DVD should be upconverted to the HDMI and component outputs. • Highlight Scaler setup… in the Video setup menu, and press Enter. The Scaler setup menu is displayed: • Press V or A to select the timeout delay, and press Enter.
35 Configuring the DVD player The Gamma correction affects the grey scale, and can be set To set the HDMI options to 1.0, 0.8, 0.9, or 1.1. If the picture has poor detail in the dark • Highlight HDMI options… in the Video setup menu, and areas choose a Gamma correction below 1.0. If the picture press Enter. has poor detail in the light areas choose a Gamma correction greater than 1.0. The HDMI setup menu is displayed: The Sharpness can be set to Off, Low, Medium, or High.
36 Configuring the DVD player Configuring the audio The Audio setup menu lets you select the audio settings of the • Highlight Application in the Audio setup menu, and press Enter. DVD player. • Highlight Audio setup… in the Setup menu, and press Enter. The Application menu is displayed. The options are different for the G91A and G98.
37 Configuring the DVD player To specify the application for the G91A On the G91A the Application menu provides eight options: These are explained in the following table: Select this option For this application Surround (Type 6) To use the DVD player as a surround controller, connected directly to a surround system consisting of DSP loudspeakers, analogue active loudspeakers, or passive loudspeakers with power amplifiers.
38 Configuring the DVD player Dolby Digital compression Auxiliary output settings To specify Dolby Digital compression To specify the auxiliary output settings This option is useful for reducing the dynamic range of Dolby • Highlight Aux out… in the Audio setup menu, and press Digital soundtracks, such as when watching a film late at night. It is only available on the decoded output. Enter. The Aux out menu will be displayed: • Highlight DD compression in the Audio setup menu, and press Enter.
39 Configuring the DVD player The following menu is displayed: • Press V or A to choose between 48kHz and 96kHz, and press Enter. When playing audio at higher rates it will be downsampled to the rate you have specified. To select Meridian High Resolution on the auxiliary output Meridian High Resolution is a proprietary format using encryption and anti-copy methods that allows secure transfer of audio streams between elements of a Meridian-only system for the purpose of playback only.
40 Configuring the DVD player • Choose No if you are connecting the AUX output to a Meridian The following menu is displayed: digital surround controller. Multichannel output settings To specify the multichannel output settings • Highlight Multichannel out… in the Audio setup menu, and press Enter. The Multichannel out menu will be displayed: • Press V or A to choose between 48kHz and 96kHz, and press Enter. Choose the appropriate rate for the product your DVD player is connected to.
41 Configuring the DVD player The following menu is displayed: • Choose Yes if you are connecting the multichannel outputs to a Meridian digital surround controller. Note that in surround mode the multichannel outputs will always decode the bitstream, regardless of this setting. HDMI output settings To specify the HDMI output settings • Highlight HDMI out… in the Audio setup menu, and press Enter. • Press V or A to select Yes or No, and press Enter.
42 Configuring the DVD player The Speakers menu will be displayed: Speakers (G91A only) To configure speakers If you are using the G91A in a surround application, directly connected to up to six DSP loudspeakers, or power amplifiers and analogue loudspeakers, the Speakers menu allows you to configure the speaker layout and enter calibration settings. • Highlight Speakers… in the Audio setup menu, and press Enter.
43 Configuring the DVD player To calibrate the speaker layout (G91A only) • Highlight Calibration… in the Speakers menu, and press Enter. • Press V to highlight the Distance figure and press Enter to edit it. • Measure the distance from the listening position to the speaker and enter the value using the V or A keys, or the MSR+ number The Calibration menu will be displayed: keys, and press Enter to confirm it. • Press Return when you have entered the values for all the speakers.
44 Configuring the DVD player Configuring the sources If you are using the DVD player as the controller or video switcher To configure a source in your Meridian system, you can use the Source setup option on • Press the source key on the remote corresponding to the source the Setup menu to configure each of the sources. • Highlight Source setup… in the Setup menu, and press Enter. you want to configure. The Source configuration menu shows the values of each option defined for that source.
45 Configuring the DVD player To assign an audio input to the source (G91A only) To assign a video input to the source • Highlight Audio input in the Source configuration menu, and • Highlight Video input in the Source configuration menu, and press Enter. The Select audio input menu will be displayed: • Highlight the Analogue, Digital, Optical, or Internal input you want to use for the source, and press Enter to select it.
46 Configuring the DVD player Configuring settings The Meridian setup menu allows you to configure settings that The product settings are generally set to an appropriate value when affect the operation of the DVD player. you reset the DVD player to the standard settings, and you should not normally need to alter them. To configure settings • Highlight Meridian setup… in the Setup menu, and press Enter.
47 Configuring playback options Configuring playback options DVD-Video discs are capable of providing a wide range of options and special features. This chapter explains how to use the options on the Setup menu to configure the playback options of the G Series DVD player.
48 Configuring playback options The Audio language menu is displayed: The Subtitle language menu is displayed: • Press <, >, A, or V to highlight the default soundtrack • Press <, >, A, or V to highlight the language you want to use, language you want to use, or select Original to choose the and press Enter. original soundtrack language, and press Enter.
49 Configuring playback options The Menu language menu is displayed: • Enter your four-digit password and press Enter. Initially the password is set to 7890, but you can change it to any password you choose as described in To change the password, page 50. The following screen then allows you to set the rating level: • Use <, >, A, or V to highlight the language you want to use, and press Enter.
50 Configuring playback options To change the password • Highlight Change password on the Set rating level screen and press Enter to select it. The following screen allows you to specify the new password: • Enter the four-digit password you want to use and press Enter to select it. The password cannot start with a zero. Take care not to forget your password, or you will need to contact your Meridian dealer to reset it for you.
51 Configuring playback Region codes options For commercial reasons many DVDs are encoded with one or more The different parts of the world are divided into regions 1 to 6 as region codes to identify the countries in which they can be used. shown in the following diagram: Every DVD player is assigned a region code to determine which discs it can play.
52 Configuring playback options Video controls The G Series DVD players include several video controls to allow The following table shows the full list of video controls: you to adjust the video image. The video controls are available for video sources, and the picture position controls are also available Display Description for the internal DVD. Video Allows DVD-A discs to be navigated without using the picture.
53 Tr o u b l e s h o o t i n g Troubleshooting We expect you to achieve superb results with the DVD player. If, however, you encounter any problems, either when installing and configuring it, or during operation, please check the following pages for suggested solutions. If these suggestions fail to cure the problem, please contact your Meridian dealer for further assistance.
54 Tr o u b l e s h o o t i n g The DVD player unexpectedly switches from pause to • Ensure that the receiver uses well-screened antenna cable. stop, or fades the screen to black • Relocate the receiver with respect to the DVD player. This is caused by the pause or stop timeouts. The pause timeout automatically switches the DVD player from • Connect the receiver and this product to different AC outlets. pause into stop mode if no key has been pressed for the specified Audio problems time.
55 Tr o u b l e s h o o t i n g Video problems FM tuner problems There is no picture FM tuner reception is poor The G Series DVD players include video switching, so each source To obtain high-quality stereo reception on FM a good aerial is can be associated with a video input or the internal DVD. essential. Try positioning the aerial at different points in a room; generally performance is best high up and near a window. • Select the DVD source.
56 Tr o u b l e s h o o t i n g DAB tuner problems Creating MP3 discs The display shows “No signal” MP3 discs can be created from a computer using appropriate MP3 This indicates that the tuner cannot locate a signal for the selected encoding software and a CD-ROM writer. service. Generate the MP3 files with a data rate of at least 128kbits per • Check that the antenna is connected correctly and reselect a service. You may need to use a better aerial. second.
57 Maintenance Cleaning To clean the case, display panel, and keypad • Disconnect the power cord before cleaning the unit. The exterior surfaces of Meridian G Series products are made from solid anodised aluminium, powder coated steel, thermoplastic rubber, and glass. They are designed to be easily wiped clean with a dry, lint free cloth. Greasy marks should be removed by light rubbing with a slightly damp cloth and a trace of proprietary glass cleaner.
58 Tr o u b l e s h o o t i n g Service and guarantee Service Guarantee The Meridian G Series of hi-fi components has been carefully The product is guaranteed against defects in material and designed to give years of untroubled service. There are no user- workmanship for two years from the date of purchase. serviceable parts inside the case, nor do the units require any form of maintenance.
59 Index A connections accessories 7 cleaning 57 AM antenna 7, 24 communications 22 AM reception 24, 55 preamplifier 10 analogue outputs 9 tuner (G91A only) 10 antennae, connecting 24, 25 video 17 Application menu 36 contrast, changing 52 aspect ratio, changing 52 controller, setting 23 audio connections analogue outputs 9 D digital outputs 8 DAB antenna 7, 25 Audio setup menu 36 DAB reception 25, 56 automatic setup 23 default soundtrack language, selecting 47 auxiliary output defa
60 Index G91A (continued) M preamplifier connections 10 mains fuse, changing 57 speakers, configuring 42 maximum sampling rate 40 speaker layout, calibrating 43 auxiliary output 38 specifications 6 multichannel output 40 surround system 15 menu navigation 30 tuner connections 10 Meridian DSP loudspeakers, connecting to 11 video connections 17 Meridian High Resolution, selecting G98AH 1, 2 auxiliary output 39 audio connections 9 multichannel output 40 communications connections 22 Merid
61 Index S T S-video, connecting 18 troubleshooting 53 safety warnings ii tuner connections 10 scaler options 34 TV standard screensaver options 33 power up 33 Setup menu 47 displaying 29 sources selecting 32 two-channel analogue, connecting to 12 Types 27, 28 audio inputs, assigning 45 configuring 44 video inputs, assigning 45 Source setup menu 44 speakers, configuring (G91A only) 42 speaker layout, calibrating (G91A only) 43 specifications 6 surround processor, connecting to 13, 14 surround
62 Index
