User guide

107
Set-to-Set Messaging
5. From the Edit Mode screen, use the
dial pad to enter a text message. Press
the Delete Key to delete a character.
Press the Case Key to toggle between
upper and lower case characters.
Press the Cancel Key to exit the screen
without saving changes.
Note 1: Please refer to “Add a Personal
Directory entry” on page 97 for detailed
instructions on using your telephone’s dial
pad to enter text.
Note 2: Press the Up Navigation Key to
access special characters you may want to
include in your message.
6. Press the Done Key.
Your message is saved and you return
to the Set-to-Set Message Screen.
/
7. Press the On Key/Off Key to toggle
the Set-to-Set Messaging status
between On and Off.
Note: If a message has not been defined,
the On or Off Key will not appear. Use the
Edit Key to enter a message before
activating Set-to-Set Messaging.
or
/
8. Press the Quit Key or the Applications
Key to exit the Set-to-Set Messaging
application.
Note: If you press the Quit Key or the
Applications Key before you press the
Done Key, you exit the application without
saving your changes.
Done
On Off
Quit
Applications