User guide

106

Set-to-Set Messaging

With the Set-to-Set Messaging application activated (available on the M3903

and M3904), an internal caller using an M3903 or an M3904 receives a quick

visual message, which you have selected, whenever they dial your telephone

number. The length of your message is limited to 24 characters. The message is

entered through the dial pad keys using a process similar to the one used for

entering names in the M3904’s Personal Directory. Only one message can be

stored in your telephone’s memory.

You can check your Call Log to determine whether or not a caller was sent the

set-to-set message. A

(M3903) or (M3904) will appear beside the call log

entry of the callers who saw your message. Note: This feature is not available on

the Meridian SL-100.

To activate Set-to-Set Messaging:

1. Press the Applications Key.

2. From the Applications menu, use the

Navigation Keys to highlight

Set to

Set Messaging

3. Press the Select Key.

The Set-Set Msg screen appears

indicating the status of the feature (on

or off) and whether or not a message

is stored (defined) in memory.

Note: On the M3904, if you have

activated password protection on your

Directory/Log, you will need to enter your

password to continue.

4. Press the Edit Key to enter a new

message or edit the stored message.

Applications

Set to Set Messaging

Select

Edit