User guide

Set-to-Set Messaging

With the Set-to-Set Messaging application activated (available on the M3903

and M3904), an internal caller using an M3903 or M3904 telephone receives a

quick visual message, which you have selected, whenever they dial your

telephone number. The length of your message is limited to 24 characters. The

message is entered through the dial pad keys using a process similar to the one

used for entering names in the M3904’s Personal Directory. Only one message

can be stored in your telephone’s memory.

You can check your Call Log to determine whether or not a caller was sent the

set-to-set message. A *

* (M3903) or (M3904) will appear beside the call log

entry of the callers who saw your message. Note: This feature is not available on

the Meridian SL-100.

To access Set-to-Set Messaging:

1. Press the Applications Key.

2. From the Applications menu, use the

Navigation Keys to highlight Set to

Set Messaging.

3. Press the Select Key. The Set-Set

Message screen appears indicating

the status of the feature (on or off) and

whether or not a message is stored

(defined) in memory.

Note: On the M3904, if you have

activated password protection on your

Directory/Log, you will need to enter your

password to continue.

To edit the currently stored message,

or to create a new message:

1. Press the Edit Key.

Applications

Set to Set Messaging

Select

Edit