User guide

47
Additional Call Features
Additional Call Features
Auto Dial Transfer Feature
Auto Dial Transfer allows you to use your Auto Dial Key to transmit digits to the
central office after a Trunk Switchhook Flash. You must be on a central
office/exchange (CO) trunk call from or to a CO which offers Centrex or
exchange line-type features.
To use Auto Dial Transfer when you
pick up an incoming trunk call:
1. Press the Trunk Switchhook Flash Key
and wait for interrupted dial tone.You
receive a speed dial tone.
2. Press the Auto Dial Key to call the
number desired.
/
3. Press the Goodbye Key to end the call.
Note: On the Meridian SL-100, Auto Dial
can be used to transfer calls however, you
do not have to be on a central office trunk
call, and the Trunk Switchhook Flash key is
not applicable to the Meridian SL-100.
Use the buzz signal
Two telephones can link together to allow one person to signal the other. The
person signaled hears a buzz. Use this feature to notify the other person of a call,
a visitor, or a request.
To buzz the telephone linked to
yours:
1. Press the Buzz Key.
The telephone linked to yours, buzzes as
long as you hold down the key.
2. When you are finished, release the
Buzz Key.
Note: Buzz signal is not available on the
Meridian SL-100.
Flash
AutoDial
Goodbye
Buzz
Buzz