User guide

While on an active call

Use Call Park

Call Park allows a call to be held temporarily, to be retrieved from any telephone.

You can park an incoming call and page the called party. When you use Call Park

you do not tie up a line. Your system administrator can set up a System Park DN

where most calls get automatically parked.

If configured network wide, Call Park can be used across networks.

To Park a call on the System Park

Extension or your own DN:

While on an active cal,

press the Park Key.

If there is a System Park DN, the call

automatically parks on the System Park

DN. Otherwise, it parks on your DN.

Note: On the Meridian SL-100, press the

Park Key and you receive a confirmation

tone. Press the Park again or the

Goodbye Key.

To park a call on a DN other than the

System Park Extension or your own

DN:

1. Press the Park Key.

2. Dial the DN where you want to park

the call.

3. Press the Park Key again.

Note: On Meridian SL-100, press Directed

Call Park (DCPK) Key. Dial the DN where

you want to park the call. Press DCPK

again.

To park a call using the SPRE code or

FFC/FAC:

1. Press the Transfer Key or press the

Conference Key.

Park

Trans

Conf