User guide

While on an active call

This section describes features that you can use while on an active call.

Place a call on Hold

Use the Hold feature when you are on the line with one party and a second call

comes in on a second line. You can answer the second call and retain the original

call by putting it on Hold.

To place a call on Hold:

Press the Hold Key. The LCD indicator

flashes beside the line on hold.

Note 1: If Automatic Hold is on, the active

call is automatically put on Hold when you

answer the second call. On the Meridian

SL-100 Automatic hold is the default.

Note 2: The caller hears music while on

hold, if the music feature is on your system.

To retrieve a call on hold:

Press the Line (DN) Key beside the flashing

LCD indicator.

Transfer a call

The Transfer a call feature is used to redirect a call to the appropriate person.

To use the Transfer feature to direct a

call to a third party.

M3904 or M3903

1. Press the Transfer Key The other party

is on hold and you receive dial tone.

The LCD indicator lights steadily.

M3902

2. Dial the number where you are

transferring the call.

Hold

2498

Trans

Transfer