User guide

11
Your telephone call features
Your telephone call features
Your system administrator assigns features to your programmable feature keys.
Whenever this guide describes a procedure that requires special codes ask your
system administrator to provide these to you.
To access a feature, you press a Feature Key, or enter a Flexible Feature Code
(FFC) or Feature Access Codes (FAC) for the Meridian SL-100. Your system
administrator supplies you with Flexible Feature Codes or Feature Access Codes.
Note: In order to use a feature described in this section, your system software must
support the feature and the feature must be assigned to your telephone. Check
with your system administrator for more details.
Use handsfree calling (M3902, M3903, and M3904)
If your telephone is a M3902, M3903, or M3904 you can use the built-in
microphone and speaker instead of the handset for a handsfree call. While on an
active call, you can switch between Handset and Handsfree mode.
To answer a call with handsfree:
Press the Handsfree Button. You are now
on a handsfree call.
To discontinue a handsfree call:
/
Press the Goodbye Key to end the call.
To mute a handsfree call:
/
1. Press the Mute Key. The LED
indicator flashes.
/
2. Press the Mute Key again to return to a
two way handsfree conversation.
To switch from handsfree to handset:
1. Lift the handset to switch from
handsfree to handset.
2. Replace the handset to end the call.
Goodbye
Mute
Mute