User guide

77
Troubleshooting
To clean the case, display panel, and
keypad
Disconnect the power cord before cleaning the unit.
The exterior surfaces of Meridian G Series products are
made from solid anodised aluminium, powder coated
steel, thermoplastic rubber, and glass.
They are designed to be easily wiped clean with a dry,
lint free cloth. Greasy marks should be removed by
light rubbing with a slightly damp cloth and a trace of
proprietary glass cleaner. Do not use any other solvent
or abrasive based cleaners.
Ensure that no liquid enters the casework and that the
product is completely dry before re-connection.
To clean the audio connections
The audio sockets on the back of the product are gold
plated and do not need to be cleaned if gold-plated
phono plugs are used. Otherwise, it is recommended
that you unplug and reconnect the plugs at least once
a year. A proprietary contact cleaner can be used to
some advantage.
To change the mains fuse
Remove the mains connector, and pull out the drawer
above the power input to access the fuse.
Before replacing a blown fuse, it is best to ascertain
the cause of the failure.
The fuse drawer includes a spare fuse. This should be
replaced by a fuse of the same rating.
•
•
Maintenance